PWD Service Tech Support Documents

Shows and exploded view of the pre 1997 casement window assembly.

PDF file includes illustrated assembly guide.

PDF file includes illustrated guide for removal and installation of entry door weather stripping.[Peachtree Company guideline]

The plastic w/s adapter [insert] can be installed by pushing it into the door frame weather strip kerf or sliding it into the kerf.
The open side of the plastic insert always is installed facing towards you.
This is the "U" channel the weather strip barbed edge inserts into.
To slide it into the door frame kerf, insert a section at the lock strike location and center hinge on the opposite jamb.
These locations have an oversized mortise area allowing for the material to be easily inserted.
Slide one section down into the door frame kerf and another upward to complete the insert on each side.
Trim the insert to the correct size for the vertical install.
The top frame insert can be pushed into place with a small putty knife or screwdriver.
The weather strip is then inserted into the kerf, vertical sections first then the top horizontal.
The top weather strip section should have an angle cut on each end to overlap the vertical sides- use the original section as an example for this detail.

PDF file includes illustrated instruction guide

PDF file includes part descriptions, part numbers, comments, and illustrations.

PDF file contains illustrated instruction guide.

PDF file contains illustrated instruction guide.